@@ -1,1 +1,1 @@ - +<br>The female camlock is a common coupling that connects two plumbing pipes. It can be made of different materials, but the common material is PVCu. In case you adored this article along with you want to obtain more information relating to [https://www.inoxcamlockfittings.com/ball-valve-with-iso5211/ www.inoxcamlockfittings.com] i implore you to check out our web site. It is known to be able to cope with varying size and types of fitting. The most common application of the female camlock is in the kitchen, but it can also be used in other areas of the home, such as the bathroom or bedroom. When installing the female npt threads onto the threaded pipe, you need to make sure that the threads are firmly seated into the coupling, so it doesn't come out of the male npt threads, because this can cause damage to both the male npt threads and the female npt threads. If you are wondering how to thread these coupling pipes, then you should follow the instructions on the packaging.<br><br><br>To get started, you need to prepare your working area by making sure that all the things that you need are ready, and are arranged in a way that you can easily access them. Make sure that the space available in the working area is large enough to accommodate the female camlock threads. You should ensure that there is enough room to bend the pipe adapter that will be installed. This will allow the female adapter threads to be properly installed.<br><br><br>Once you have prepared the area, remove the old coupling from your pluming system and clean the threads with the help of soap. There is nothing like the feel of clean metal. It is important to also lubricate the threads that will be coming along with the female camlock adapter. If you don't lubricate the threads, then they will rust and the coupling may become weak over time.<br><br><br>Next, you should install the female npt threads on the male pipe adapter that you have already prepared. Lay the male adapter on the female camlock threads, starting from the left side. Slide the adapter in place and make sure that it is snugly fitted to the pipe. Make sure that the male npt threads are lined up with the grooves on the female camlock. It is important that the female npt threads line up with the grooves on the male adapter.<br><br><br>If you are using a universal type of coupling, then make sure that the male adapter fits the female npt threads snugly without being too tight or too loose. If you are using a global type of coupling, then you need to install the coupling in reverse. Lay the male adapter on the female camlock threads and make sure that it is snugly fitted to the pipe.<br><br><br>Now it is time to install the new grooved coupling. Using the supplied pipe wrench, loosen the bolts on both sides of the coupling, while applying enough oil onto the threads of the coupling to keep them lubricated. After that, slide the adapter on the pipe, making sure that it is snugly fitted. Tighten the bolts again, and reattach the old coupling to the pipe. Install the new grooved coupling onto the female cam locks as well as the grooved adapter on the female npt threads to complete the installation.<br>